Siig CE-H26011-S1 1080p Hdmi Extender Over Cat5e6 165ft 1080p Hdmi Ethernet Extender Hdmi Loopout Ir Extension Stereo Audio Low Latency
by Siig

Specifications

Specifications : 

• HDMI 1.3 and HDCP 1.2 Compliant
• Video resolutions: 1080p/720p/480p/480i @60Hz
• Audio support: 2-channel Stereo Audio
• Transmission range: 1080p up to 164ft (50m)
• HDMI cable distance: up to 2M (Input & Output)
• IR frequency: Supports 20KHz to 60KHz
• Housing: Metal
• Power supply: 5V/1A

Compatible Devices :

• HDMI source device, such as computer PCs, game consoles, Blu-ray players, gaming consoles, and media players
• HDMI displays, monitors, and HDTVs

SIIG 1080p HDMI Extender Over Cat5e/6 164ft with Local HDMI Loopout (CE-H26011-S1)

SIIG HDMI Extender over Cat5e/Cat6 with IR and Loopout – 164ft (50m) extends HDMI audio and video signals over one cost-effective CAT5e/6 cable while maintaining signal strength and superior quality. Much more consistent and reliable than using a long HDMI cable. It supports up to 1080p resolution and extends transmission distances up to 164ft (50m).

SIIG HDMI Extender Over Ethernet

Lossless Transmission

This HDMI balun model extends HDMI audio/video signal to a distant video display and is as fluent as a direct connection. Generally, HDMI cables lose quality after the first 15 feet, but our product will maintain the expected picture for up to 164 feet! Added capability of HDMI loop out on transmitter acts as a splitter.

Simple Installation and Operation

• Easy plug-and-play installation is as straightforward as connecting video cables and turning on the extender.
• No software installation or configuration required.
• Wall mountable to keep hidden or off the ground.

How It Works : 

1 - Connect your HDMI source device to the Transmitter with an HDMI cable

2 - Run a CATx Ethernet cable from the transmitter to the receiver units included in the kit

3 - Connect your HDTV, monitor, or projector at a remote location to the receiver unit with another HDMI cable

4 - Connect the included power adapters to a power outlet (recommend surge protected) to both the receiver and transmitter

5 - DONE!

HDMI Loop-Out and IR Remote Control Extension

• The transmitter is equipped with an HDMI out port for connection to a local display for monitoring and cascading HDMI signal being passed to a distant area.
• Provides convenience of knowing what is showing on the display that is connected to the receiver side in a separate room.
• IR Remote allows the user to control the source from the remote display side for added convenience.

What's in the Package :

• HDMI CAT5e/6 Extender with IR – 164ft (50m) Kit (Transmitter & Receiver units)
• IR TX Blaster cable
• IR RX Receiver cable
• Power adapters (2)
• User’s guide

Important Notes :

• A good quality CAT Ethernet cable is essential in delivering quality content. HDMI to CAT6 is recommended over HDMI to CAT5e
• This kit is point to point and comes with a Sender and Receiver. It’s not meant to work through routers or network switches